[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: GSBN:Re Thermal Properties of Straw Bale Walls
- To: "GSBN" GSBN@...
- Subject: Re: GSBN:Re Thermal Properties of Straw Bale Walls
- From: "Nehemiah Stone" stoneandstraw@...
- Date: Thu, 24 May 2007 10:45:02 -0700
- Reply-to: "GSBN" GSBN@...
- Sender: "GSBN" GSBN@...
You are right. ...for actual buildings. Still, for a test, load bearing
does not solve the problem. The wall segments tested WERE load bearing.
The problem is that you need a tight fit between the edges (top, bottom,
and sides) of the wall segment and your surround panels of known
conductivity. Otherwise, you get less insulative areas that screw up the
"average" conductivity results.
> [Original Message]
> From: John Glassford jacksflat@...
> To: GSBN GSBN@...
> Date: 5/20/2007 10:16:39 AM
> Subject: Re: GSBN:Re Thermal Properties of Straw Bale Walls
> G ' day
> You can avoid all the chain sawing, squishing and car jacking and
> stuffing by going load bearing.